Custom Design Jewelry in Dayton, Ohio
Our Custom Design Process Brings Your Vision to Life with a One-of-a-Kind Piece
Have an idea for a ring, pendant, or heirloom redesign that you cannot find on any showroom shelf? Custom jewelry design in Dayton, Ohio, is what we do best at Elizabeth Diamond Company, where every piece is created in-house from your first sketch to the final polish. Our design team turns the picture in your head into a piece you will wear for a lifetime.
- • See exactly what goes into your written estimate before any work begins.
- • Watch your idea take shape through detailed CAD drawings and a hand-finished wax model.
- • Understand the casting timeline so you know what to expect during the roughly twelve-week process.
The whole process takes about 12 weeks and moves at your pace based on your approvals. We will walk you through each phase so there are no surprises. Below is a closer look at the services we offer and what happens at every stage.
| Custom Service | What We Create | Ideal For |
|---|---|---|
| Custom Engagement Rings | Solitaire, halo, three-stone, and side-stone designs built around your center diamond | Proposals and milestone moments |
| Custom Wedding Bands | Matching sets, contoured bands, eternity styles, and designs for him and her | Couples who want a coordinated look |
| Custom Fine and Fashion Jewelry | Necklaces, pendants, earrings, and bracelets made to your specifications | Birthdays, anniversaries, and personal expression |
| Heirloom Redesign and Restoration | Resetting stones and reimagining inherited pieces into something fresh | Preserving family memories |
| One-of-a-Kind Creations | Fully original concepts taken from sketch to finished piece | Anyone wanting a design all their own |
Where Custom Jewelry Design in Dayton, Ohio Starts: Your Estimate
Everything begins with a conversation about what you want to create. We talk through your inspiration, your budget, the metals and stones you have in mind, and any pieces you may want to incorporate. From there, our team prices out the materials, labor, and design work, then puts together a written estimate that usually reaches you within a week. You will see the cost laid out clearly before committing to anything. Once you approve the estimate and place a fifty percent deposit, we move into the design phase. Reach out to set up your first consultation and get the conversation started.
Seeing Your Design Take Shape Through CAD
After your estimate is approved, our designers build a three-dimensional model of your piece using computer-aided design software. This CAD drawing lets you view your ring or pendant from every angle long before any metal is poured. You can request changes to the band width, stone placement, gallery details, or anything else that doesn't quite feel right, and we will revise the model until it matches your vision. Most CAD work is finished within about two weeks of your approval. This stage is where custom-made jewelry in Ohio really comes alive, because you help shape the look down to the smallest detail.
Crafting the Wax Model You Can Hold
Once you sign off on the CAD design, we create a wax model of your piece, often printed or carved directly from the approved file. Holding a physical version in your hand is the moment many customers fall in love with their design. The wax reveals the true proportions, weight, and how light will move across the finished jewelry. If something feels off, this is another chance to fine-tune before any precious metal is involved. Wax models are typically ready within about two weeks of CAD approval, keeping the project on track toward the finish line.
The Casting Process and Final Finishing
With your wax model approved, the piece heads into casting, the longest and most involved phase. The wax is encased in a mold, then melted away so molten gold or platinum can take its place, a centuries-old method known as lost-wax casting. After the metal cools, our bench jewelers clean the casting, set the stones, and hand-polish the piece until it shines. Casting and finishing take roughly eight weeks, so a little patience pays off. The result is custom-made jewelry in Ohio built to last for generations.
Start Your Custom Piece at Elizabeth Diamond Company
Shoppers from across the Miami Valley trust us with their most meaningful pieces, whether they are headed downtown to the Oregon District for a celebration or simply looking for a ring that tells their own story. Custom jewelry design in Dayton, Ohio, gives you something no catalog can match, a piece made around your idea and no one else's. Our in-house design studio and bench jewelers handle every phase under one roof, so your project stays in trusted hands at every stage. Stop in to see our work and meet the team, or schedule a design consultation to begin. We would love to help you create something you will treasure. Own it!
Frequently Asked Questions
How long does the custom design process take?
Most custom pieces take about twelve weeks from approved estimate to finished jewelry. The estimate reaches you in roughly a week, CAD design takes about two weeks after approval, the wax model follows within two weeks, and casting runs around eight weeks. The timeline moves at your pace, since each phase waits on your approval.
Where do you create your custom jewelry?
Every piece of custom design jewelry in Dayton, Ohio, is made in our own in-house studio at Elizabeth Diamond Company. Customers come to us from across the Miami Valley, including those near the Oregon District, RiverScape MetroPark, and the communities along I-75. Because our designers and bench jewelers work under one roof, your project never leaves our hands.
Do I need to pay a deposit before design work starts?
Yes. We begin CAD design once you approve your written estimate and place a fifty percent deposit. The deposit covers the materials and design time required to build your custom model. The remaining balance is due when your finished piece is ready.
Can I make changes to my design along the way?
Absolutely. The CAD and wax model stages are built around your feedback. You can adjust stone placement, band width, metal choice, and other details until the design feels right. We would rather take the time to get it perfect than rush a piece you will wear for years.
Why does casting take so long?
Casting is the most detailed phase, usually around eight weeks. The wax model is set in a mold, the wax is melted away, and molten metal is poured in its place before stones are set and the piece is hand-polished. Quality work cannot be rushed, and the wait is what makes the result worth it.
Can you redesign an heirloom or use my own stones?
Yes, we love giving family heirlooms a new life. We can reset existing stones, rework an inherited piece, or build something entirely original around gems you already own. Bring your pieces in, and we will talk through the possibilities during your consultation.
